Wire Harness Source Needed

Discussion in 'General Motoring' started by Piperson, Jul 6, 2008.

  1. Piperson

    Piperson Guest

    I need a wire harness for the front turn signal/emergency/side marker
    for a 1999 Chrysler T&C Limited. The part number on the (approx. 30")
    cable is 4707837AA 17778C.

    Can anyone please point me to a source other than the dealer?
     
    Piperson, Jul 6, 2008
    #1
  2. Piperson

    Bill Putney Guest

    Junk yard?

    Bill Putney
    (To reply by e-mail, replace the last letter of the alphabet in my
    address with the letter 'x')
     
    Bill Putney, Jul 6, 2008
    #2
  3. Piperson

    maxpower Guest

    Do you need a harness or just the connector???

    Glenn Beasley
    Chrysler Tech
     
    maxpower, Jul 6, 2008
    #3
  4. Piperson

    Piperson Guest

    Actually, the car side connector is needed. 2 of the 3 wire broke
    and/or pulled out of the current one. The plug end is okay except for a
    burnt side maker socket. I can live with out that. I am told that
    soldering these wires is a pain due to an oxide coating???
     
    Piperson, Jul 6, 2008
    #4
  5. Piperson

    Piperson Guest

    BTW. Another label on the bulb end of the cable indicates

    NS JPR PARK/TURN
    110722
    Assembled in Mexico

    There is no label on the car-end connector.
     
    Piperson, Jul 8, 2008
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 87 Plymouth Voyager radio wire harness

  2. 94 intrepid harness wiring-trunk light

  3. Short in wiring harness help??

  4. Wiring Harness Differences

  5. 90 New Yorker Fuses and Harness

  6. 2002 Pt Cruiser Internal Harness failure

  7. 1999 Plymouth Voyager SE 3.3L:Wire Harness Battery Acid/Transmission Overhaul

  8. Wiring Harness...

Loading...