Which scan tool to get for 98 Chrysler T&C?

Looking to get a scan tool for a 98 Chrysler Town and Country (suspect
intermittent bcm but that is another post) but one that you know works for
this vehicle. I do not have a laptop so it would have to be the handheld
type. Looking at spending $100-130.00. Thanks to all that reply also I know
it is pushing it but if it would work in a 2005 Acura RSX or a 86 300zx that
would be nice.
Greyhound
Tampa, FL

 

I am pretty sure all that you can get that will scan other than the PCM
is a DRB3

http://miller.spx.com/data/DC05-157.pdf

you won't find one for that price that does anything except read the PCM.

Thanks to all that reply

2 completely different animals! you may not be able to find a scanner
for anything pre '96

 

Forget it. The scanners in that price range can only read basic OBD-II,
they
cannot read the manufacturer-specific superset of OBD-II which is what
you need to troubleshoot anything other than just emissions.

OTC makes a Genesis scanner that can do this - cost for a refurbished
one plus the software modules you need is about $1000.00 You can
get these on ebay - check auction 170146925688 for an example.

Ted

 

if you are spending 130.00 all you will get to do is check pcm codes. the
software needed for bcm and abs and airbag modules will exceed 1500.00 on the
low side since you don't have a laptop

 

For $130 you don't get a scanner at all. You get a code reader. Big
difference.

 

Please let me pitch in.

If laptop is available, what are the low cost, good scanner out there
for Chrysler (scanner and software module for Chrysler).
I often receive AutoTap advertisement (through email). I wonder
they're any good, and how good compared to others in term of feature
availability, reliability, compatibility and ease of use.