Turn/emergency Flashers

Discussion in 'General Motoring' started by Tom O, Feb 24, 2004.

  1. Tom O

    Tom O Guest

    I have a 1995 Chrysler Cirrus 2.5 v6 with 165000 mile. Still Perfect
    running car. Except for one problem. My Flasherd are not working at
    all. Could anyone help me with this. I have check the relay fuse. The
    fuses look good.

    Tom O
     
    Tom O, Feb 24, 2004
    #1
  2. Tom O

    N.Cass Guest

    My 1995 Eagle did the same thing. On my car I located the wiring harness
    that was right by the battery, shook it and moved it around, and all of
    a sudden the turn signals/flashers started working again. My
    brother-in-law (who is an ASE certified mechanic) told me this was a
    common problem with my car. Don't know if it will work on yours, but it
    won't cost you anything to try it.
     
    N.Cass, Feb 25, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. '95 Voyager turn/washer/dip switch question-!!

  2. emergency brake fix

  3. Lebaron Turn Signal Sound Too Soft

  4. 1996 Grand Caravan Emergency Brake Does Not Hold

  5. 2002 PTC Emergency Brake Light flashes on Acceleration

  6. 2000 GC Emergency brake question

  7. Coleman Fuel for emergency use in cars?

  8. Help Parking Brake cable emergency Caravan

Loading...