Town & Country door closer problem

Discussion in 'General Motoring' started by harrym, Jun 19, 2005.

  1. harrym

    harrym Guest

    The plastic link mechanism that carries the wires in the bottom door
    track has developed problems. It keeps separating at the same place,
    jamming the door. I then have to close it by hand, guiding the link
    mechanism along the track. This looks like the individual links can be
    replaced. Does anyone know if they can, or does the whole mechanism
    have to be replaced? Has anyone else had a problem with this door closer?
     
    harrym, Jun 19, 2005
    #1
  2. harrym

    maxpower Guest

    The complete track has to be replaced

    Glenn Beasley
    Chrysler Tech
     
    maxpower, Jun 20, 2005
    #2
  3. harrym

    harrym Guest

    Does that include the wiring bundle, or is it just the plastic linkage?
     
    harrym, Jun 20, 2005
    #3
  4. harrym

    maxpower Guest

    The complete harness and track, from connector to connector and is easy to
    install
     
    maxpower, Jun 20, 2005
    #4
  5. harrym

    tim bur Guest

    the harness is available with the links only as a whole
    it's not that hard to replace and it's not a big cost
     
    tim bur, Jun 22, 2005
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 96 Town & Country door locks

  2. '94 Chrysler Town and Country problem

  3. 1999 Town & Country Tail Light Problem

  4. Power Door Lock problem on 2000 Town and Country

  5. 04 chrysler Town & country power sliding door problem

  6. 2006 Town & Country sliding door problem

  7. door mirror Town & Country limited 2006

  8. 2002 Chrysler Town & Country LX sliding door problem

Loading...