stalling

Discussion in 'General Motoring' started by jim shackett via CarKB.com, Apr 22, 2005.

  1. put an engine in my car it has 82,000 miles the car is a 94 lebaron conv.
    it stalls when under load at stop lights when i step on the gas at the rpms
    hit 4500 the engine just goes to nothing like 1500 rpms when i let off the
    gas it is ok shifts fine but in that rpm range the engine just about quits
    foung on the egr valve a control valve which is conected to egr by a vacum
    it has wires on it which are connected but there is a nother nipple to a
    vacum hose that i cant find trying to locate a diagram for the egr vacum
    could this be my trouble????
     
    jim shackett via CarKB.com, Apr 22, 2005
    #1
  2. just ran codes got 12 24 55 12 yes just had engine replaced 24 i belive is
    trottle position sensor can that cause my problem????
     
    jim shackett via CarKB.com, Apr 22, 2005
    #2
  3. jim shackett via CarKB.com

    Bill Putney Guest

    Why don't you try using punctuation so people don't have to spend their
    time trying to figure out where one sentence ends and another begins.

    Bill Putney
    (To reply by e-mail, replace the last letter of the alphabet in my
    adddress with the letter 'x')
     
    Bill Putney, Apr 22, 2005
    #3
  4. their r lot's off problem's that cold cause ur engine to stall even when
    it only has 82,000 miles dude u r gonna need a service manual you can get
    them like from many place's and u right like a goddamn third grader so if
    u cant b bothered to write coherently what make's u think anyone will take
    the time to help ur sorry ass OMG OMG LOL LOL ROFL OMG if u fix car's like
    u write then that explain's the problem write their and if u read the
    code's like u write then how do u know the codes werent 12 65 32 12 um
    dude theirs no such thing as 12 at the end of the code's u thundering
    moron OMG LOL
     
    Daniel J. Stern, Apr 23, 2005
    #4
  5. jim shackett via CarKB.com

    Shep Guest

    Geez Dan, I hope my spell check works on my next post/reply. But you are
    right!!!
     
    Shep, Apr 23, 2005
    #5
  6. jim shackett via CarKB.com

    Joe Guest

    Your typing is too poor for troubleshooting. For instance, when you say:

    "It stalls at stoplights when I step on the gas it shifts ok" that could
    mean two things. It could mean:

    1. It stalls at stoplights. And, when I step on the gas it shifts okay.

    or

    2. It stalls at stoplights ONLY when I step on the gas. And, it shifts okay.

    Try to separate each thought out into a separate sentence so we can tell
    what your car is doing. Space them out if you have to.
     
    Joe, Apr 23, 2005
    #6
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.