Spark Plug Replacement, 99 Voyager

Does anyone know how to get to plugs 3 & 5, on a 3.3L, which are in the
back?

Please help

John

 

The cowl comes off and you do it from underside or take the plenum off to do
it.
Larry

 

They can be done from the bottom, but it requires a good bit of
dexterity. You can also pull the wiper module and get them from the
top. This takes longer but is much easier.

 

I agree take the wiper box (cowl) off, and the plenum off also. Go buy
yourself a set of wires, and the plenum gasket, and tighten the plenum
side support (the one that goes in the end of the block) last after
torquing the other plenum bolts. As said before "I hope you have the
factory service manual"

 

i used a Snap-On swivel socket and a Snap-On air ratchet from underneath
15 minute job

 

Job competed and a total success. Thanks for all the help.

John Walker

 

Just curious, which way did you go about it?

Job competed and a total success. Thanks for all the help.


John Walker
<<<

 

hey would that be the same way on a 2001 LXi with a 3.8? I haven’t
looked underneath yet.