serpentine belt

Discussion in 'General Motoring' started by Smitty, Oct 12, 2006.

  1. Smitty

    Smitty Guest

    I need to put a new belt on my 95 Concorde 3.5. How do I release the idler
    tension on this engine???
    Thanks
    Smitty
     
    Smitty, Oct 12, 2006
    #1
  2. Smitty

    DeserTBoB Guest

    Wrench the idler arm to relieve spring tension, replace belt.
     
    DeserTBoB, Oct 12, 2006
    #2
  3. Smitty

    damnnickname Guest

    wrong!!
    loosen the 15mm nut and using a 13 socket back off on the screw, install
    belt and tighten screw and lock down the 15mm nut

    Glenn Beasley
    Chrysler Tech
     
    damnnickname, Oct 12, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Need a serpentine belt diagram for a '94 Plymouth Grand Voyager

  2. Help with Serpentine Belt replacement

  3. 91 3.0V6 serpentine belt

  4. Serpentine Belt falls off - '98 Voyager 3.0 V6

  5. 2001 Grand Caravan - not engine = serpentine belt

  6. 96 T&C Serpentine belt problems

  7. Serpentine belt replacement

  8. Serpentine Belt Tensioner Nut Torque

Loading...