Sebring 2001

Discussion in 'Sebring' started by edjar, Aug 10, 2006.

  1. edjar

    edjar Guest

    The drivers auto door lock stopped working. I checked the fuses and replaced
    the button but it still doesn't work. The actuator is good because it opens
    and closes when the passenger button is pressed. Any ideas?

    Thanks.
     
    edjar, Aug 10, 2006
    #1
  2. edjar

    damnnickname Guest

    You say you replaced the button does that mean you replaced the master
    switch? If so and it didnt fix it you can start by checking for
    continuity at pin 4 WT/DG wire from the switch at the drivers side to pin
    15 (brown Connector) of the BCM. If this wire is good you

    Glenn Beasley
    Chrysler Tech
     
    damnnickname, Aug 11, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Sebring 2001 sedan / blower resistor.

  2. 2001 Intrepid vs 2001 Sebring

  3. 2001 Sebring Sedan brake lights don't work

  4. 2001 Sebring Sedan 2.7 Engine/Tranny Whistle ??

  5. 2001 Sebring Temp gauge fluctuations

  6. 1999 Intrepid v.s. 2001 Sebring

  7. sebring door handle on 2001 Sebring

Loading...