Resetting 2002 Neon Check Engine Light

Discussion in 'Neon' started by sleddog05468, Feb 22, 2005.

  1. sleddog05468

    sleddog05468 Guest

    Which Fuse to pull to resett the check engine light in a 2002 Neon. I
    did it once and can not remember which one. I pulled them all this
    time but light stays on so I must of forgot something in the
    procedure.

    Any one know what the correct procedure is without a scan tool to get
    the light off in a 2002?

    Thanks,
     
    sleddog05468, Feb 22, 2005
    #1
  2. sleddog05468

    TNKEV Guest

    You could disconnect the battery for a while and it may go off, but if your
    vehicle is having a problem it will come back on,if you are attemting to go
    through emissions this will not work!
     
    TNKEV, Feb 22, 2005
    #2
  3. sleddog05468

    sleddog05468 Guest

    Thanks I did that and light stayed on. The code was for a misfire in
    Cyl # 1. I replaced Plugs and wires and now it is running fine. Will I
    have to wait for "Three Good Trips" before it will reset itself and go
    off?
     
    sleddog05468, Feb 22, 2005
    #3
  4. sleddog05468

    TNKEV Guest

    It might go off on its own, if not try diconnecting the battery again.
     
    TNKEV, Feb 22, 2005
    #4
  5. sleddog05468

    HarryS Guest

    On most vehicles after 96 you need a scan tool to reset the check engine or
    service soon lite.

    HarryS
     
    HarryS, Feb 22, 2005
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.