PT Cruiser Bellcrank replacement.

Discussion in 'PT Cruiser' started by jimhigh66, Nov 14, 2007.

  1. jimhigh66

    jimhigh66 Guest

    The bellcrank in the rear suspension of our 2001 badly needs replacement.
    It should be easy if I could get the watts links ball-ends loose from the
    bellcrank. I've tried a small gear puller (and some hammering) on the
    lower end without any success. I suspect the stud may be tapered and
    should pop loose -- but it doesn't. Any suggestions or tricks ? Jim
     
    jimhigh66, Nov 14, 2007
    #1
  2. jimhigh66

    philthy Guest

    tierod end pickle fork works good
     
    philthy, Nov 17, 2007
    #2
  3. jimhigh66

    jimhigh66 Guest

    A puller in combination with hammering on the bellcrank worked and didn't
    damage the link ends.
     
    jimhigh66, Dec 2, 2007
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Replacement Brake Brake Pads/Shoes

  2. PT Cruiser battery replacement?

  3. PT Cruiser horn replacement

  4. PT Cruiser drive belt replacement

  5. Replacement Tires for PT Cruiser Convertible

  6. PT Cruiser timing belt replacement?

Loading...