Programming Keyless Entry Remote- 2000 T&C ltd

Is there a procedure for programming one's keyless entry remote
without visiting the dealer? I do not have a working fob as the prior
owner lost them. I read that in older models there was a wire that
you could ground to initiate the process? Any ideas?

 

You need to have the dealer program this remote. if you already had 2
working ones you could program the 3rd one. The old 94 models let you
ground a wire to program them.

Glenn Beasley

 

http://dodgeram.info/tsb/2002/08-007-02.htm

 

a shop with a high quality scan tool can progam a remote for you call
around
some dealer will do it for free if you are a regular

 

    There are 2 programming procedures for the 00 Town &
Country. .
 
     If you have at least 1 currently working
remote, you can program up to 3 more remotes (total of 4 at once) by
yourself.
 
    Without any current remotes, you can still program
new units, however a Chrysler DRB scantool is required.  
Most Chrysler / Jeep / Dodge dealerships now have the small portable
scantools and can program remotes in the parking lot in 10 seconds,
rather than book time in a service bay for such a quick procedure.
 
    Most dealerships will do this for free as a courtesy
to local customers.