Power Steering Flush advice (2001 Intrpeid 2.7L)

1) What method should I use to replace the entire volume of PS fluid ? I
realize that changing just what is in the reservoir is not enough.

2) What fluid should I use to replace the original ? I've seen random
discussions here about synthetic is OK; synthetic is not OK; use only
Mopar; use anything.

Thanks in advance

Phil

 

Use ATF+4 as DC currently recommends. Disconnect one end of return
line, start it up, add new fluid while old fluid drains into catch
bucket; having helper turn steering wheel from lock to lock a couple of
times during that process.

Bill Putney
(To reply by e-mail, replace the last letter of the alphabet in my
address with the letter 'x')

 

Thanks Bill.

That method is pretty much what I was thinking about after eyeballing
everything, but I wanted some reassurance. There's quite a healthy
flow through that little reservoir when it's running.

Much appreciated....Phil