Opinion on work done-price?

Discussion in 'General Motoring' started by GrtArtiste, May 3, 2005.

  1. GrtArtiste

    GrtArtiste Guest

    The car is a 1996 Concorde LXI with 95703 miles. I saw the parts and
    know the work was needed. I'm just asking if the price charged is good,
    average or too high? Work performed by a NAPA auto store. All work done
    in one day.

    Lube oil filter $22.00 Check vehicle tune up for rough idle. Replace
    plugs and wires. Replace PCV valve and fuel filter. Clean throttle
    plates, replace PCV hoses. Inspect front end and brakes. Replace outer
    tire rod ends and inner tie rod bushings. Check four wheel alignment
    and adjust. Total labor $280.00

    Parts list:eek:il, filter and plugs. Platinum spark plugs, spark plug
    wires, PCV valve and fuel filter, one serpentine belt, one PCV vent
    tube, two #64 hose clamps, one 705-1024 hose clamp, two #40 hose
    clamps, two 269-2934 outer tie rod ends, one 274-9223 inner tire rod
    bushing kit, one foot 5/8 inch PCV hose. Subtotal parts $293.86

    LOF $22.00
    Labor $280.00
    Parts $293.86
    Tax $41.72 7%

    Total $637.58 Thanks for any opinions
     
    GrtArtiste, May 3, 2005
    #1
  2. GrtArtiste

    Punch Guest

    actually price seems low .
     
    Punch, May 3, 2005
    #2
  3. GrtArtiste

    Art Guest

    Sounds like a deal.
     
    Art, May 3, 2005
    #3
  4. GrtArtiste

    Guest Guest

    If you are talking Canadian Dollars, you got a steal.
     
    Guest, May 3, 2005
    #4
  5. GrtArtiste

    kmatheson Guest

    My only question is if all those parts were needed to correct the rough
    idle. If the PCV valve and hoses were original, it was probably time
    for replacement. Same for the fuel filter, and serpentine belt.

    -Kirk Matheson
     
    kmatheson, May 3, 2005
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.