No spark condition.

Discussion in 'Concorde' started by diamondbgunsmith, May 12, 2020.

  1. diamondbgunsmith

    diamondbgunsmith

    Joined:
    May 12, 2020
    Messages:
    1
    Likes Received:
    0
    Greetings all. I'm new here, and I've run into the apparently frequent problem of no spark in my Concorde. It's a 1996, 3.3l v6 with 143K miles on it. We've changed the PCM, coil pack, ASD relay, cam and crank position sensors, to no avail. The timing belt is not broken, and appears to be fine. My son was driving it, said it "surged" on him a couple of times, died once, then started fine. He parked it, tried to start it, and no go. I got it to start and moved it to the front of my driveway, parked it, shut it off, and nothing after. The weird thing was, that the fuel gauge quit working as well! The tach and speedo jump when cranking the engine, but no start. It's probably been asked before a million times, but any ideas/things to check/look for? I'm about at my wits end. Thanks.
     
    Last edited: May 12, 2020
    diamondbgunsmith, May 12, 2020
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.