New and need help

Discussion in 'General Motoring' started by shelby, Jul 11, 2005.

  1. shelby

    shelby Guest

    Hi. I've got a 2004 Pacifica and it needs a rear window wiper blade.
    bought the right size at Walmart but i can't figure out how to get i
    on. the arm only pulls away from the glass about 6 inches so I can'
    pull the blade through to snap it off. is there a trick to these or d
    I have to get a special one frommy chrysler dealer? Any help
     
    shelby, Jul 11, 2005
    #1
  2. shelby

    Joe Guest

    Are you trying to refill, or replace the whole wiper?
     
    Joe, Jul 12, 2005
    #2
  3. shelby

    shelby Guest

    refill... sorr
     
    shelby, Jul 12, 2005
    #3
  4. shelby

    Joe Guest

    My parts guy had to show me how to do it. You have to pop a whole section of
    the wiper "holder" loose to refill it. It'll come apart at the articulated
    joints, and you can just take a piece off either end. I'm talking about a
    piece of plastic that's 3" long.

    Hard to explain stuff like this on Usenet.
     
    Joe, Jul 13, 2005
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.