My 89 plymouth voyager floods

Discussion in 'Voyager' started by HGCG, Nov 8, 2003.

  1. HGCG

    HGCG Guest

    My 89 plymouth voyager floods and will not start. I get no codes when
    I check it (only 12 and 55). Gas pours out of the place where the
    hoses are connected for the MAP sensor. It is a 6 cyl. 3.0, I believe.

    It first started when it became hard to start, then it stated to run
    rough with a strong smell of gas, then I could only keep it running by
    holding my foot on the gas pedel (with black smoke), now it won't
    start at all.

    Any Ideas will be a help

    Thanks in advance


    Henry
     
    HGCG, Nov 8, 2003
    #1
  2. HGCG

    damnnickname Guest

    It sounds as if the fuel pressure regulator has ruptured and the fuel is
    being sucked into the vacumm hoses
    glenn Beasley ]
    Chrysler tech
     
    damnnickname, Nov 11, 2003
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. High Pitched "Tone" 97 Plymouth Grand Voyager

  2. ABS problem - 1991 Plymouth Grand Voyager 3.3 L

  3. 1991 Plymouth Voyager - A/C compressor noise

  4. 2000 Plymouth Voyager: Radiator Fan Question

  5. Plymouth voyager stalls

  6. Plymouth Voyager - check autm 3 speed transmission

  7. 72 Satellite won't start, carb floods

  8. 1984 chrysler newyorker 4 cylinder 2.6 L starts fine cold but floods on start when hot

Loading...