Measuring Oil Pressure 2002 3.3L Dodge Grand Caravan

Discussion in 'General Motoring' started by HKEK, May 21, 2007.

  1. HKEK

    HKEK Guest

    Is there an extra port on the block where I can connect a gauge to
    measure oil pressure? I am try to assess a used van for purchase.
    Thanks.
     
    HKEK, May 21, 2007
    #1
  2. HKEK

    master tech Guest

    You need to remove the oil pressure sending sensor and install a
    mechanical guage.
    The switch receives oil pressure input from the engine main oil
    gallery. When engine oil pressure is greater than 27.5 Kpa (4 psi),
    the switch contacts open, providing a open circuit to the low pressure
    indicator light.
     
    master tech, May 22, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.