Jeep Cherokee lift question

Discussion in 'General Motoring' started by gett'nintothejeepthing, Jan 30, 2006.

  1. gett'nintothejeepthing

    gett'nintothejeepthing Guest

    OK... Dumb question but I haven't found any specs anywhere that state
    what I am looking for.. I have a 2001 Jeep Cherokee Limited.. It has a
    3 inch Block lift in the rear end and a EZ ride spring lift in the
    front end runnning on 31's. Anyhow the front end has a good 2 inches
    more wheel well clearance than the rear end. IE the rear end seems a
    bit low... I have kept my eye open and see that some lifted Cherokees
    have this difference in the front and rear end and some do not.. My
    question is is it normal for it to have that much differance? If not I

    plan on fabricating some Extended Leaf spring mounts to iradicate the
    block lift while using stock springs to keep the smoother ride...
    Comments? Ideas? etc :).. Thanks for all of your help
     
    gett'nintothejeepthing, Jan 30, 2006
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Question on checking valve lift 360 motor.

  2. Advice on 1999 Jeep Cherokee vs. 2001 Jeep Cherokee

  3. Jeep Grand Cherokee battery question

  4. Jack lift point on front of Voyager

  5. Jeep YJ Lift and Transmission Question

  6. CJ Jeep Cherokee Question

  7. Help, 1986 Chrysler LeBaron Window Lift Gear Kit

  8. 1998 Jeep Cherokee Sport- brake question

Loading...