Jackstand placement on 1993 Grand Voyager

Discussion in 'Voyager' started by kmath50, Apr 25, 2007.

  1. kmath50

    kmath50 Guest

    I need to replace the front brake pads on this vehicle.

    I would like to know where is the best and safest place to position
    the jack stands. There is a place on the *frame rail* behind where the
    lower control arm is attached. Moving a little further back, some
    sheet metal comes down vertically, right next to the frame rail. If I
    put the jack behind the control arm mount, then I have no place for
    the jack stand.

    Would it be safe to place the jack under the control arm mount?

    There are positions for a hoist, but are clearly marked that they are
    for hoist use only.

    Any suggestions welcome.

    I am sorry if this has already been posted. My newsgroup server does
    not appear to have any recent posts on it.

    Thanks,

    Kirk Matheson
     
    kmath50, Apr 25, 2007
    #1
  2. kmath50

    Ralf Ballis Guest

    Ralf Ballis, Apr 25, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Mid-Engine Placement Ideal

  2. 1993 Grand Voyager

  3. Stalls and Dies 1993 Plymouth Grand Voyager 3.3

  4. 1993 Plymouth Grand Voyager 3.3 - Stalls when hot

  5. 1993 Grand Voyager

  6. 1993 Grand Voyager help please

  7. 1993 Grand Voyager. Safe location for jackstands

  8. 1993 Grand Voyager 3.0L lash adjusters

Loading...