Intake Manifold - 96 3.0l caravan - how to test

Discussion in 'General Motoring' started by Mike C1, Jun 18, 2004.

  1. Mike C1

    Mike C1 Guest

    I have a 96 Caravan with a rough idle, codes a misfire(43), but runs fine
    otherwise. It failed an E-test due to high HC at idle. It's been like this
    for 150 kms, but I'd like to fix it. Compression is 155 - 160 lbs across
    the board. Fuel pressure is ok. I am thinking a leak in the intake, but
    wondered how to test for this. What are the options/techniques for
    detecting an intake manifold leak on the 3.0l engine? Any other
    ideas/experiences?
    Thks.
     
    Mike C1, Jun 18, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Intake manifold leaks on LH cars

  2. 97 Stratus 2.4 Exhaust Manifold

  3. Repair or Replace cracked eshaust manifold

  4. Oil in Intake Plenum - 88 3.0 Caravan

  5. Combustion Leak test - head gasket test

  6. Intake manifold torque specs?

  7. 90 MONTERO BAD COMPUTER OR BAD DISTRIBUTOR ? HOW TO TEST ??

  8. very low vacuum and how to test fuel pressure

Loading...