installing an ac compressor

Discussion in 'General Motoring' started by AWantz, Aug 29, 2006.

  1. AWantz

    AWantz Guest

    Ok have to install an ac compressor for a friend, is there anything
    that I should be worried about? Also does anybody have any tips for the
    job?
     
    AWantz, Aug 29, 2006
    #1
  2. AWantz

    DeserTBoB Guest

    If you have to ask this, then you need to call the friend back and
    tell him to take it to an AC shop. If you do not know the right base
    stock/grade oil, which refrigerant, have a good vacuum pump and
    service guage set, then you shouldn't be doing the job. I guarantee,
    if you try this without the proper tools and knowledge, the system
    will fail in short order, and take the "new" compressor with it.
    Rebuilders are VERY careful about scrutinizing failed compressors on
    warranty claims now. They can spot wrong oil, acetic oil, wrong or
    mixed refrigerant, low charge, poor or non-existant vacuum
    pulldown...you name it. If you want to keep this person as a friend,
    refuse the job...period.

    More new and rebuilt compressors are sold because of jobs like this
    doen in driveways by unqualified people than any other single reason.
     
    DeserTBoB, Aug 29, 2006
    #2
  3. AWantz

    the MAGNATE Guest

    whatever you do, don't take the advice of new resident troll,
    DESERTBOB- the guy doesn't even know his wrench sizes, and actually
    drives an old rotted 1970's Honda car
     
    the MAGNATE, Aug 29, 2006
    #3
  4. AWantz

    DeserTBoB Guest



    Thanks to your reports to Google Groups,
    has been banned by Google Groups from polluting Usenet anymore.
     
    DeserTBoB, Aug 29, 2006
    #4
  5. I would be very hesitant to "backyard wrench" an A/C system. Evacuation
    of refrigerant, purging, refilling, all use tools that must must also
    be used correctly [usually beyond the average wrencher's experience and
    domain].

    Give a year, make, model, engine size, maybe I can find a link for ya
    to r & r the compressor, but I would really suggest take it to a shop.
    The $$ spent would be well worth the savings in time, aggravation,
    needed tools, and risk of personal harm.

    Not to mention, screwing things up. At least your friend would have
    recourse with a shop to get it done right, with you, you could end up
    in front of Judge Judy. :wink:

    Tell your friend to open his/her wallet and get it done by a shop.
     
    Knifeblade_03, Aug 29, 2006
    #5
  6. AWantz

    Joe Guest

    I completely agree with Desert Bob's advice. If you have to ask this
    question on Usenet, that's a sign you should just stop.
     
    Joe, Aug 30, 2006
    #6
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.