i need a tid bit of help

Discussion in 'General Motoring' started by franco, Oct 29, 2007.

  1. franco

    franco Guest

    i need to know where i can get the return line for my powersteering
    but the only thing is i need the rubber line and the metal line that
    it connects to if any 1 can help please tell me
     
    franco, Oct 29, 2007
    #1
  2. franco

    Steve B. Guest

    Without knowing a make year or model the only thing I could suggest
    would be the dealer. You could also pull the old one off and take it
    to a hydraulic shop and get it remae / repaired.

    Steve B.
     
    Steve B., Oct 29, 2007
    #2
  3. franco

    uccoskun Guest

    www.rockauto.com might have cheap replacement for you.
     
    uccoskun, Nov 1, 2007
    #3
  4. franco

    Joe Guest

    Just walk into any auto parts store and tell them what you want. The return
    line is not under pressure, and on most cars it's not over-engineered at
    all. Usually just a section of hydraulic hose clamped onto some barbed
    ends.
     
    Joe, Nov 7, 2007
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. need some help...

  2. T&C need help with heat

  3. A bit of research on the ATF +3 ATF +4 issue

  4. Need help on starter problem

  5. possible vacuum leak, need help

  6. need help

  7. Help! Need help choosing "tune-up" parts.

  8. 95 lebaron GTC acting a bit strange

Loading...