I have a problem with my A/C on my 300M.

Discussion in 'Chrysler 300' started by Marc, May 28, 2005.

  1. Marc

    Marc Guest

    The pressure seems OK the clutch is engaging on the compressor but no cold
    air! I set the A/C all the way down and nothing happens. The low pressure
    hose is warm and the high pressure side is very hot. Any suggestions?

    Marc
     
    Marc, May 28, 2005
    #1
  2. Marc

    phil Guest

    ion the fuse bos there is a fuse that sits up higher than the rest
    unplug it for 5 minutes reinsert and then start car up and let it do it's thing

    under the conditions the software of the keyless entry mess's with the bcm and
    the hvac module and it woun't calibrate properly this cahnges that
     
    phil, May 28, 2005
    #2
  3. Marc

    Marc Guest

    Thanks Phil - that was the problem. I thought it would be something like
    that - sort of like unplugging a consumer electronics piece for 20 minutes
    and plug it back in and it works again!

    Marc
     
    Marc, May 29, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.