How to program keyless entry for a 1999 town & country?

Discussion in 'General Motoring' started by degangma, Aug 21, 2005.

  1. degangma

    degangma Guest

    I have aworking one, and I bought another one. How do I program the
    remote? I followed the user manul that came with the car, I could not
    make it work. Please help me.
     
    degangma, Aug 21, 2005
    #1
  2. degangma

    degangma Guest

    Nobody reply? Can somebody help me here?
     
    degangma, Aug 27, 2005
    #2
  3. degangma

    maxpower Guest

    With a good functional key fob, unlock and disarm alarm. turn the key to
    the run position only, dont start the vehicle. with a good key fob, press
    the unlock button for 4 seconds, while holding the unlock button, press and
    relaease the panic button, A chime should be heard thru the Body controll
    module,now the RKE module is ready to recieve the new key fob signal.
    within 30 seconds of the chime press and release the lock and unlock button
    at the same time on the transmittor to be programmed. then press any other
    button on the remote. The chime should activate again letting you know that
    the signal was recieved.

    Glenn Beasley
    Chrysler Tech
     
    maxpower, Aug 27, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Program Remote Entry Clicker, 94 GC

  2. Can you add Factory Keyless Entry to a 1999 Caravan Sport

  3. Keyless Entry Distance

  4. keyless entry installation

  5. Keyless Entry for 300M Chrysler. Where is Info???

  6. how to program keyless remote for 2K Durango

  7. 2001 Town & Country Keyless Entry Problem

Loading...