How dodge is the Avenger?

Discussion in 'General Motoring' started by Marvin Cohen, Oct 4, 2003.

  1. Marvin Cohen

    Marvin Cohen Guest

    My brother is looking at the dodge avenger, and I was wondering how good is
    this car? Is it all mitsu or just the engine? Is the transmission the
    41TE? Is the body Chrysler sheetmetal or mistsu? Vehicle electronics
    Chrysler or mitsu?

    How good is the 2.5 mitsu v6? Does it have the same problems as the 3.0
    valve guide seal degradation and smoking?


    Thanks
     
    Marvin Cohen, Oct 4, 2003
    #1
  2. Chrysler plus Mitsubishi: Worst of both worlds. These kinds of
    joint-venturemobiles seldom work out nearly as well as they "should" on
    paper.
    Whole car is Mitsu, except transmission and nameplates.
    About as good as any Mitsu engine in recent memory. *cough*

    DS
     
    Daniel J. Stern, Oct 5, 2003
    #2
  3. Marvin Cohen

    Martin Boer Guest

    Don't know anything about that.
    I have a '98 Stratus with the 2.5V6 and it is a very, very good engine.
    Mitsuthingy has used it themselves in cars with a biturbo. So it can handle
    quite a lot of abuse. In my car that means it an average of 26 mpg at 70 mph and it pulls a 2800 lbs trailer, doing 50mph, at 1700 rpm.

    Martin
     
    Martin Boer, Oct 6, 2003
    #3
  4. Marvin Cohen

    Lloyd Parker Guest

    and it pulls a 2800 lbs trailer, doing 50mph, at 1700 rpm.
    At least in the US, Mitsu never sold a biturbo and never sold a sohc V6 with a
    turbo and never sold a 2.5 L V6 as a turbo. The only turbo V6 was the 3.0
    dohc in the Stratus/3000GT.
     
    Lloyd Parker, Oct 6, 2003
    #4
  5. Marvin Cohen

    Steve Guest

    I think you meant "Stealth/3000GT."
     
    Steve, Oct 6, 2003
    #5
  6. Marvin Cohen

    mic canic Guest

    it's a mit's build
    the car sucks and costs lots of money to maintain but the 2.5 v6 proved itself
    to a much better engine than the 3.0
     
    mic canic, Oct 8, 2003
    #6
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.