Homebrew motorcycle question.

Discussion in 'General Motoring' started by Daniel Who Wants to Know, Mar 14, 2009.

  1. Daniel Who Wants to Know

    Daniel Who Wants to Know Guest

    How hard do you guys think it would be to make a custom motorcycle or trike
    Boss Hoss style using a Chrysler FWD drivetrain? I envisioned 2
    possibilities: 1. A shaft drive motorcycle using a 3.3 and an A604/41TE or
    2. A trike using a 3.3 and a 42LE.

    I don't know how hard it would be to either remove/weld the differential
    from a 41TE to drive a single shaft or make a custom transfer gear cover
    with the shaft attached there.
     
    Daniel Who Wants to Know, Mar 14, 2009
    #1
  2. Daniel Who Wants to Know

    Dori A Schmetterling Guest

    Would it be road-legal?

    DAS

    To send an e-mail directly replace "spam" with "schmetterling"
     
    Dori A Schmetterling, Mar 16, 2009
    #2
  3. Daniel Who Wants to Know

    Daniel Who Wants to Know Guest


    Hopefully, yes.
     
    Daniel Who Wants to Know, Mar 17, 2009
    #3
  4. Daniel Who Wants to Know

    Jerry - OHIO Guest

    Jerry - OHIO, Mar 18, 2009
    #4
  5. Daniel Who Wants to Know

    Jerry - OHIO Guest

    Jerry - OHIO, Mar 18, 2009
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. A/C Question - 94 Intrepid 3.5

  2. '95 Voyager turn/washer/dip switch question-!!

  3. '92 LeBaron GTC and EVIC module question

  4. Question on '92 Dynasty

  5. Question about throttle body cleaning on 97 Cherokee

  6. 89 caravan transmission question.

  7. Question on checking valve lift 360 motor.

  8. Question on satisfactory spark plug cables for 3.5L

Loading...