help with some information

Discussion in 'General Motoring' started by jo jo avenger boy, Aug 13, 2006.

  1. Hi everyone i am need of some help i have a 95 avenger es 2.5 v6 and i
    am getting three codes from the pcm. i cant figure out what is going on
    here the codes are 22 23 and 44 and 44 is the one i can get right i
    dont understand what this text below means.. could some one translate
    it into simple tearms doesd it mean i need a air temp sensor??
    this is for code 44.............


    The power module has an air-cooled resistor which is used to sense the
    incoming air temperature. This information is fed to the logic module
    and is used to control the duty cycle of the field current in the
    alternator. This code applies ONLY to alternators whose voltage is
    computer regulated. The battery voltage is sensed by the logic module
    -- there is an internal takeoff from the wire feeding the NVRAM
    keep-alive power circuit which is fed to a voltage comparator. So...if

    you lose the feed to keep RAM information stored when the engine's off,

    you also lose battery voltage sensing.

    thanx to all that can help
    joe
     
    jo jo avenger boy, Aug 13, 2006
    #1
  2. jo jo avenger boy

    maxpower Guest

    I believe all those faults are related to voltage high or out of range,
    since they all share the same ground I would start tracing the black/wire
    from the sensors back to the PCM and you will probably find your problem.
    Don't just start tossing parts at it because it wont fix it.

    Glenn Beasley
    Chrysler Tech
     
    maxpower, Aug 13, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.