Help with 97 Vision/Intrepid ATC rear defroster/defogger

Discussion in 'General Motoring' started by Mike M, Nov 5, 2005.

  1. Mike M

    Mike M Guest

    The rear window defroster/defogger on my 97 Vision has quit working. I
    replaced the relay, but still do not see any power at the terminals
    leading to the rear window (tested each terminal to ground, and
    terminal to terniinal, but did not see anything). I jumped the relay,
    but also saw no power at the terminals.

    My question is - what should I see at the r/w/d terminals on the back
    of the ATC unit. Since everything else works OK on the unit, I am
    trying to avoid replacing the entire thing.

    TIA.

    Mike
     
    Mike M, Nov 5, 2005
    #1
  2. Mike M

    maxpower Guest

    Mike, you mention nothing about all the fuses being checked?

    Glenn Beasley
    Chrysler Tech
     
    maxpower, Nov 5, 2005
    #2
  3. Mike M

    Mike M Guest

    Hi Glenn - Sorry, should have mentioned that. ATC fuse is good (I did
    manage to short it when I was jumping the relay). Is there a separate
    fuse for the rear window defroster?

    Mike
     
    Mike M, Nov 7, 2005
    #3
  4. Mike M

    maxpower Guest

    I dont have the book here at home, the best thing to do is check them all
    with a test lite.There may be some under the hood in the PDC so be sure to
    check there
     
    maxpower, Nov 7, 2005
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.