Help needed with Chrysler 96 Sebring

Discussion in 'Sebring' started by ramaks, Dec 3, 2006.

  1. ramaks

    ramaks Guest

    Hello!!

    I need some help with a chrysler issue. I have a Chrysler Sebring
    Coupe, 96, with a 2.5L V6. I am recently having some problems with the
    car.

    When i start the car in the morning, after a minute or so sometimes it
    dies. Else i drive a block, and at the next signal it dies. I restart
    and and it drives fine all the way. I notice the same behavior when i
    stop for some coffee/errand/gas after driving for say even 1 hour.
    Every time the car dies while running, the fuel gauge light comes on.

    I have taken it to a mechanic and he couldn't find anything wrong with
    a casual inspection. It doesn't happen always but happens frequently
    enough. The only thing i can observe here is that this happens..
    1) When i start the car
    2) when i am slowing down/stopping at signal/intersection.

    Would really appreciate your help on this...

    Thanks

    Rams
     
    ramaks, Dec 3, 2006
    #1
  2. ramaks

    maxpower Guest

    When you took it to the mechanic did he check to see if there were any fault
    codes stored in the engine controller? If so what were they

    Glenn Beasley
    Chrysler Tech
     
    maxpower, Dec 3, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.