fuel injection on "87" reliant 2.5 w/air

Discussion in 'General Motoring' started by dumdum, Oct 28, 2005.

  1. dumdum

    dumdum Guest

    I have a stall problem,Car runs for 5 mins. Stalls, I wait 5 mins. runs
    fine, I changed what i think is Idler (has electrical plug) in front of
    housing for fuel also changed part on passenger side of housing (also has
    electrical plug) towards back of housing (what would be carb.)Is it a
    vaccum prob.? HELP!!! I'm going nuts!!! I can hear the fuel pump.
     
    dumdum, Oct 28, 2005
    #1
  2. dumdum

    Dave Gower Guest

    Five minutes is enough time for the car to warm up. If it stalls at that
    point, it may be running too lean. They first thing is to add some injector
    cleaner to the gas, if that hasn't been done recently. Also, how long has it
    been since you replaced the spark plugs and wires? A weak spark can cause
    this problem.
     
    Dave Gower, Nov 1, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Cold Weather and Fuel Injection Fluid

  2. Lean air/fuel mixture on 95 Eagle Vision (difficult cold start)

  3. Fuel Injection Purge

  4. Idle/smoke/fuel issues with a 92 plymouth reliant

  5. Fuel Injection Pumps,diesel Pump,Plunger,nozzle

  6. China Manufacturing of Diesel Fuel Injection System

  7. 1988 Plymouth Reliant station wagon fuel pump failure

Loading...