cylinder misfire problem

Discussion in 'General Motoring' started by jcs444dixmyth, May 14, 2007.

  1. jcs444dixmyth

    jcs444dixmyth Guest

    I have a 98 caravan with the 2.4l engine with 49k miles. It has been
    occasionally sputtering lately and the ses light came on with code
    p0303-"cylinder 3 misfire detected". What would cause this problem and
    code? It has been leaking oil from the driver side rear corner from
    the original non-mls head gasket, but that is not near cylinder 3.
     
    jcs444dixmyth, May 14, 2007
    #1
  2. jcs444dixmyth

    damnnickname Guest

    when was the last time this vehicle had a tune up with a good set of plug
    wires? also make sure the spark plugs arent getting filled up with engine
    oil leaking into the plug gallies

    Glenn Beasley
    Chrysler Tech
     
    damnnickname, May 14, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Master Brake Cylinder - '93 Plymouth Sundance

  2. Brake Master Cylinder Reservoirs - replies

  3. 99 T&C ignition lock cylinder

  4. 8 cylinder to 4 cylinder in new DC V8's

  5. 98 Voyager 'Misfire'

  6. possible causes of misfire

  7. Diagnose engine misfire problem

  8. 300M misfire code P0302 -> no coil codes, no injector codes?

Loading...