Chrysler CD Changer

I have a 2001 Town & Country with a 4 disk changer. A couple of weeks ago
the car wouldn't start due to corroded batter terminal. Cleaned it up and
everything is OK except for the CD changer, it's completely locked up. The
LEDs on the front flash, first 1&2 light up then 3&4, back and forth. I've
tried leaving the battery disconnected for a few hours, doesn't help. I'm
thinking there might be a reset button, or maybe it's in theft mode? Any
help would be great. Happy New Year!
Ed Davis

 

If it has a mechanical fault code stored in the BCM the CD changer would
have to be sent out for repairs. A scan tool will be needed to check for any
fault codes stored.
recommend your local CP Dealer

Glenn Beasley
Chrysler Tech

 

there is no reset that alpine will tell us about and i have had to replace
units for the same issue
u might be able to unplug the unit it self and it might reset

 

Hi...

Here you go...

https://www.netteller.com/alpinebank/gbHelp.cfm?type=page&pagename=GenFaq2

Take care.

Ken

 

cute that link is for a online BANK called Alpine Banks of Colorado