Chrysler AUX

Discussion in 'General Motoring' started by Mike De Petris, Jan 19, 2005.

  1. Mike De Petris

    Mike De Petris Guest

    I own a '96 Chrysler Voyager with the original radio with an AUX connector
    and no CD changer, I see there are 3rd party interfaces to connect cd
    changers but it would be enough for me to connect an external player. Is it
    possible to connect the analog source to any pins of the AUX connector and
    tell the radio about the presence of the fake cd-changer?

    If not, would it be any good to use an audio(tape)cassette adapter (cables
    around) or some rf generator to tune the external source on a radio station?
    Any link on the net?

    Thank you :)
     
    Mike De Petris, Jan 19, 2005
    #1
  2. Mike De Petris

    Grouchy Guest

    No, you need the proper cable which is engineered to connect to that radio.
    You can get the cable from PIE Electronics or Bitzsafe. If you get the
    correct one it will have the mopar back of radio plug to rca connectors.
     
    Grouchy, Jan 20, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Chrysler Radio 1996 Dodge Stratus (Chrysler Sirrus?) Pinout question with GMC S15 Truck

  2. Chrysler group set to kill off its Dodge Stratus and Chrysler Sebringcoupes

  3. Free exposure for your chrysler, buy and sell chrysler items FREE

  4. Chrysler Technicians : What is Chrysler spec MS-6395 ?

  5. Chrysler to make Volkswagen Routan minivan based on the 2008Dodge/Chrysler platform

  6. Chrysler Nissan Deal: One More Step To Oblivion For Chrysler?

  7. SUVs saved Chrysler (But Fiat will ultimately kill Chrysler)

  8. Curt trailer hitch #12025

Loading...