Benz 280 SE 1969 Auto-Transmission Problem

Discussion in 'General Motoring' started by chicko, Nov 5, 2006.

  1. chicko

    chicko Guest

    If anyone could advise on this fault. I shift into drive the car moves
    forward but when I apply accelerator the engine reves, but car moves
    slowly and eventually over what seems to be too long a period it finaly
    changes into second gear. From 1st to 2nd is the problem. The rest of
    the gear changes are OK.

    Thank you.
     
    chicko, Nov 5, 2006
    #1
  2. chicko

    Ralf Ballis Guest

    Have you checked ATF level, color and smell?

    Regards,

    Ralf
     
    Ralf Ballis, Nov 6, 2006
    #2
  3. chicko

    chicko Guest

    Thank you Ralph
    I will try changing the ATF and filter

    Regards

    Chicko
     
    chicko, Nov 6, 2006
    #3
  4. chicko

    DeserTBoB Guest

    A '69 M-B used a 4 speed step gear transmission modeled after the
    original GM HydraMatic. It has nothing whatsoever in common with
    anything from Chrysler. Look elsewhere.
     
    DeserTBoB, Nov 6, 2006
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.