antitheft problem

Discussion in 'General Motoring' started by HabGuy, Sep 24, 2003.

  1. HabGuy

    HabGuy Guest

    Hi.
    I own a '95 cirrus lx 2.5.
    I don't have the original oem keyless remote. The car has an aftermarket
    starter installed which also locks/unlocks the doors.
    The keys that I have for the cars don't work on the front doors, but work on
    everything else (trunk and engine). It never bothered me since I've always
    used the remote starter keyless remote.
    Problem is that somehow or something triggered the antitheft or the panick
    mode on the car. (when it happened the car was parked at work in a fairly
    small paking lot).
    It starts, runs for 4-5 seconds then stops. Light are flashing in sync with
    the horn.
    Since I can't do the obvious and use my keys to unlock the front doors and
    therefore disable the alarm or the panic mode, my question is where is the
    oem antitheft and/or keyless remote modules located on the '95 cirrus lx?
    I've searched and looked, but no luck. I've completly uninstalled the
    aftermarket starter and still no luck. I've unplugged the battey and the
    computer for about 12 hours and still no luck, the antitheft or the panick
    mode is still on when I reconnect everything.
    Please, if somebody knows how to fix this or where the modules are located,
    let me know. I've been on this for weeks.
    thanks.
     
    HabGuy, Sep 24, 2003
    #1
  2. HabGuy

    mic canic Guest

    sound like you have a alarm remote start all rolled into one unit
    i would take it to a ziebert store or auto one and see if they can show ya how
    to use it( not trying to dis ya)
     
    mic canic, Sep 26, 2003
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.