AIS removal/TB cleaning

Discussion in 'General Motoring' started by pyroonly, Oct 4, 2005.

  1. pyroonly

    pyroonly Guest

    Hi Gang,

    I've researched the NG for this but can't quite get a solid answer.

    I have a 3.0L, I want to clean the TB and AIS. Can I remove the AIS
    from the throttle body for cleaning without having to have to reset the
    pintle? I don't want to make the thing undrivable after I clean the TB.

    Appreciate any help
    thanks mIke
     
    pyroonly, Oct 4, 2005
    #1
  2. pyroonly

    tim bur Guest

    go for it
     
    tim bur, Oct 4, 2005
    #2
  3. pyroonly

    damnnickname Guest

    no need to reset anything, But all you really need to do is clean the
    inside of the bore and the top and bottom of the blade with a tooth brush
    and that should do it.

    Glenn Beasley
    Chrysler Tech
     
    damnnickname, Oct 4, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Question about throttle body cleaning on 97 Cherokee

  2. Faulty AIS motor?

  3. 2002 300M Exterior Cleaning Question

  4. Carpet Cleaning

  5. interior glass cleaning

  6. Acclaim 2.5L AIS motor replacement/adjustment HELP needed

  7. Throttle Body Cleaning - Necessary maintenance for LH 3.2L?

  8. Cleaning EGR VAlve 2.7 98 Intrepid.

Loading...