Airbag Light, 1994 Chrysler Town & Country

Discussion in 'General Motoring' started by nleipziger, Feb 21, 2006.

  1. nleipziger

    nleipziger Guest

    Hello All.... Got a '94 Van with the airbag light on. Can someone
    give me some info on how to troubleshoot this. Location of sensors,
    retreiving the trouble code. Thanks for your help.

    Neil
     
    nleipziger, Feb 21, 2006
    #1
  2. nleipziger

    maxpower Guest

    Neil your going to need a scan tool to retrieve codes from the Air bag
    module, you need to start there.

    Glenn Beasley
    Chrysler Tech
     
    maxpower, Feb 21, 2006
    #2
  3. nleipziger

    nleipziger Guest

    Thanks, Glenn.... To the shop we go.

    Neil

     
    nleipziger, Feb 21, 2006
    #3
  4. nleipziger

    philthy Guest

    call a local dealer and have them run the vin it might be a recall issue
     
    philthy, Feb 22, 2006
    #4
  5. nleipziger

    maxpower Guest

    Neil, I meant to ask if you have a rear wiper system on this vehicle? If the
    motor is not working you may have a faulty wiper motor causing the fuse to
    blow and disabling the Air bag system. If so the dealer will replace the
    motor as part of an old recall 818.

    Glenn Beasley
    Chrysler tech
     
    maxpower, Feb 22, 2006
    #5
  6. nleipziger

    nleipziger Guest

    Glenn, you called that one correctly! I checked the airbag fuse this
    morning and it was blown. Will install a new fuse tomorrw and report
    back. Thanks for your assistance.

    Neil
     
    nleipziger, Feb 22, 2006
    #6
  7. nleipziger

    maxpower Guest

    Tell the dealer to replace the rear wiper motor part of the recall 818
    Glenn Beasley
    Chrysler Tech
     
    maxpower, Feb 22, 2006
    #7
  8. nleipziger

    philthy Guest

    he called it because there is a recall on it as i s wrote call a dealer and
    have them run the vin so it can get fixed for free
     
    philthy, Feb 23, 2006
    #8
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.