A604 problem

PostPosted: Fri Jan 05, 2007 9:40 pm Post subject: to limp or not
to limp? Reply with quoteEdit/Delete this postBack to topDelete this
post
Hi sorry about may english. i'm from mexico
i have a stratus 2.5 with a604 (41te). Yesterday i start the engine
and always go to 2.500 rpm and inmediatly go down to 700 rpm, wich is
normal i think, but yesterday when i start the engine inmediatly put
the Reverse while the motor was about to 2500 rpm and the shift
was'nt smooth, then put the autostick and the trainy come on limp
mode.
I drive for a while and turn off the engine and the same, "limp mode",
but I insisted in shifts until the tranny began to shift normaly. Then
go to highway to test the tranny and everything ok. the computer don't
display any error code.
So, do I should be worry?
wath could happen?
was my fault because of shift that way the reverse?
I often go to highway and I'm worry about a possible problem
I have 250 miles with the car and when i received change to atf-3
fluid and original mopar filter
Thank you for your comments


-------------= Posted from Ugroups.com =-------------
---= Fast & Free Web Portal to Usenet Newsgroups =---
-------------= http://www.ugroups.com/ =-------------