99 T&C accelerator pedal hangup/hesitation

Discussion in 'General Motoring' started by Frank Boettcher, Jan 12, 2004.

  1. Frank Boettcher

    Frank Boettcher Guest

    My 99 T&C has developed an irritating hangup when stepping on the
    accelerator. Seems to have significant initial resistance then when
    finally releases you have the too much pressure resulting in a
    jackrabbit start.

    I've lubricated everything from the pedal to the pivot pin on the
    plate in the throttle body.

    Oddly enough it is not there when the engine is not running. Pedal is
    smooth as glass through the whole range.

    Any thoughts?
     
    Frank Boettcher, Jan 12, 2004
    #1
  2. Frank Boettcher

    jdoe Guest

    You might have a bad motor mount. Does the cruis work? Cruise might be doing
    something. Try just turning on ignition and see if it happens.
    Larry
     
    jdoe, Jan 13, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Power window hangup 96 Grand Caravan

  2. Got a new Clutch--now the pedal is too "Light"

  3. 1987 Chrysler LeBaron GTS 2.2 auto gas pedal issue

  4. 2001 Dodge Caravan Gas Pedal Sticking

  5. 2001 Caravan Gas Pedal Sticking

  6. Soft brake pedal/excessive pedal pressure - 2001 Intrepid w/ABS

  7. Fly-By-Wire Gas Pedal for better speed control

  8. 05 Town and Country accelerator binds/will not depress

Loading...