99 Breeze Alternator Belt Tension

Discussion in 'General Motoring' started by Dale Allen, Mar 27, 2011.

  1. Dale Allen

    Dale Allen Guest

    How do you adjust the alternator belt tension on a 99 Plymouth Breeze 2.0 L?
    I've followed the instructions in the service manual and all that does is
    pull the alternator toward the front of the car to the limit of the bracket
    travel. It does not adjust the idler pulley at all. I have about 2 inches of
    slack in the belt that does not adjust out. Guidance needed. Thanks in
    advance.
     
    Dale Allen, Mar 27, 2011
    #1
  2. Dale Allen

    Joe Pfeiffer Guest

    From your description (I haven't worked on a Breeze), is it possible
    you've got the wrong belt? Years and years ago, I bought a belt that
    turned out to be mis-labelled...
     
    Joe Pfeiffer, Mar 27, 2011
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Front End Noise - 2000 Breeze

  2. how to drain antifreeze 99 ply breeze?

  3. May buy Stratus or Breeze, 2.4L headgasket problems?

  4. 96 Plymouth breeze

  5. Plymouth Breeze Steering not returning to center

  6. A/C belt squeaking - tension problem?

  7. 1999 Breeze automatic transmission , limp mode, will not shift up, solved

Loading...