98 T&C A/T aftermarket drain plug/valve installation

Discussion in 'General Motoring' started by Grey-hound, Aug 21, 2004.

  1. Grey-hound

    Grey-hound Guest

    Greetings,
    I 'm going to be changing my A/T fluid in my 98 T&C minivan and want to
    install an aftermarket drain plug on the pan when I get it off (serious mess
    last time). Looking for info on what type valve you used and the location
    you installed it on (clearance).Also what sealant or weld you used.
    From my web research http://www.fumotousa.com/ the fumoto valve looks good
    but is pricey (not affiliated). I have just E-mailed them for info on what
    would fit. Would like to hear what type you put in and experiences.
    Thanks
    Greyhound
     
    Grey-hound, Aug 21, 2004
    #1
  2. Grey-hound

    Joe Guest

    Mr Gasket makes one that's simple and easy to install. Takes a 1/2" hole, I
    think. It's gasketed, but some RTV probably wouldn't hurt. I've put in
    several over the years, but it's been a while.
     
    Joe, Aug 24, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 1996 Stratus radiator drain plug -- what size wrench?

  2. 99 Grd Caravan 3.3 Radiator Drain Plug

  3. Rad drain plug not staying in - 3.0l 1996 caravan

  4. Aftermarket AM/FM/CD installation

  5. neon oil drain plug leak

  6. aftermarket radio installation

  7. Aftermarket spark plug wires for 2.4L

Loading...