98 Stratus how drain rad

Discussion in 'General Motoring' started by Steve, Sep 9, 2006.

  1. Steve

    Steve Guest

    This has no doubt been posted before, as I cannot see any rad drain (can
    hardly see the rad!) I'm thinking pull the hose off. Can only just get at
    the engine connection and will make for difficult flushing. Do you have to
    pull the rad support at the top and the colling fans out to get at the
    bottom rad hose connection? Many thanks.
    Steve G
     
    Steve, Sep 9, 2006
    #1
  2. Steve

    kmatheson Guest

    You are correct. I posted this same question a week or so ago. If you
    have the 2.4L engine, the drain is on the left side. The valve turns
    about 90 degree to the left. At this point, gently pull it back. It is
    hard to do this only by feel.

    The last time that I did mine, I disconnected the bottom hose from the
    engine.

    If you have the 2.5 V6, the drain is on the right side.

    -KM
     
    kmatheson, Sep 9, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. how to drain antifreeze 99 ply breeze?

  2. 1996 Stratus radiator drain plug -- what size wrench?

  3. How to drain voyager manual gearbox?

  4. Lower Rad. hose 98 ply. gr. voyager

  5. Rad drain plug not staying in - 3.0l 1996 caravan

  6. 96 GRAND CARAVAN RAD FAN PROBLEM

  7. 97 caravan rad/ac fan relay

  8. Rad Repair 98 Intrepid 2.7

Loading...