'97 Jeep Starter Motor

Discussion in 'General Motoring' started by seryozha.sundstrom, Mar 15, 2006.

  1. seryozha.sundstrom

    seryozha.sundstrom Guest

    Okay..a real quick question here.
    My starter just went dead on my 97 jeep wrangler, I got a heavier duty
    one (A mean green) but the problem i am having is that the wiring is
    different. The wiring to attach to the starter is not two wires..well
    it is..but its that the two wires are molded together using ruber or
    latex.And the orientation on the stock motor is so that both terminals
    are vertical and accordingly, the wiring "boot" is oriented so that it
    will only fit that way. Now, on the new motor, one terminal is vertical
    but the other is horizontal. So, i need to know if i should just try
    and serperate the two wires by just cutting the boot or if there are
    any other suggestion?

    thanks.

    I hope i made it clear enough
     
    seryozha.sundstrom, Mar 15, 2006
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Stalling/starter problem, no way related, right?

  2. Advice on 1999 Jeep Cherokee vs. 2001 Jeep Cherokee

  3. Jeep Grand C L Rear wiper motor voltages

  4. POLL ::: If the rear differential of a 4WD jeep is overhauled by a Jeep Dealer because of failure

  5. Parts to repair starter motor contacts?

  6. Bizzare Starter Motor Problem

  7. Jeep Cherokee Headlight Levelling motor plug

  8. Jeep motor body module

Loading...