96 Intrepid Window removal

Discussion in 'General Motoring' started by Fred Wrubel, Jul 16, 2004.

  1. Fred Wrubel

    Fred Wrubel Guest

    I need to replace the driver side window motor. To do so, I need to first
    remove the glass, so I can get to the regulator, remove it and then replace
    the motor.

    The instructions for removing the glass tell me to first lower it so I can
    get at the retaining screws that hold the glass to the regulator roller
    channel. The problem I have is that the window can't be lowered (new motor
    needed).

    Anyone know how I can get this accomplished?

    Thanks,
    Fred
     
    Fred Wrubel, Jul 16, 2004
    #1
  2. Fred Wrubel

    Dave Guest

    Tap on the motor with a wrench or small hammer while holding the down button
    and it should go down.
     
    Dave, Jul 16, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. '90 New Yorker Wiper Arm Removal

  2. Removal of Drive window & Door handle Shadow

  3. 95 Intrepid rear window defogger doesn't! (defog that is)

  4. 98 Intrepid, wiper arm removal?

  5. 93 Intrepid AC evaporator removal-Question

  6. Intrepid 98. Window bizzare bahavior

  7. 97 Intrepid rear wheel removal

  8. '99 Intrepid pwr window controls

Loading...