96 intrepid rear drum brakes

What size nut holds on the back brake hub on a
1996 Intrepid? I thought it was a 34mm deep socket
but it seems bigger than that. Thanks for any help.

 

According to this thread (has what appears to be the procedure out of
the FSM) on DI.net:
http://www.dodgeintrepid.net/forums/showthread.php?t=70182&highlight=rear+drum+nut+size
some guy used a 1-7/8" socket, which, if correct, would translate into
either a 47 or 48mm. Torque would be 124 ft-lbs.

Bill Putney
(To reply by e-mail, replace the last letter of the alphabet in my
address with the letter 'x')

 

Thanks Bill I didn't even know that there was a www.dodgeintrepid.net web
site. There is allot of
good information on the site.
Thanks again
Den

 

You're welcome!

Bill Putney
(To reply by e-mail, replace the last letter of the alphabet in my
address with the letter 'x')