96 chrysler intrepid check engine code deciphering

Discussion in 'General Motoring' started by jd, Jan 13, 2004.

  1. jd

    jd Guest

    Can anyone decipher these check engine codes for a 96 intrepid:

    1, 2, 4, 3, 4, 3, 5, 1, 5, 5.

    Any correct help will be most appreciated.

    GS
     
    jd, Jan 13, 2004
    #1
  2. jd

    Mike Behnke Guest

    Code 12 indicates codes following. Code 55 is End Of Codes.

    Assuming the 3.5L, you've got the notorious leaking intake manifold
    gasket (most likely at cylinder 5 at least) which is setting the one of
    the Code 43's. Thats leaning out the fuel/air mixture and possibly
    triggering the lean O2 condition (Code 51). Code 51 can also indicate a
    dead O2 sensor at the lean end, or a bad MAP sensor.

    Best to get the intake problem fixed first. May eliminate the lean
    condition. Good time to have the fuel rail recall taken care of at the
    same time if not already completed.
     
    Mike Behnke, Jan 13, 2004
    #2
  3. jd

    Steve m... Guest

    Anyone interested in a 95' Factory Service manual for say... uhm... $25 let
    me know.
    It would cover models from 93 - 97.

    Steve m.....

    (my email address is stevem5215 at bigfoot.com )
     
    Steve m..., Jan 16, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.