95 Cirrus Starter Problem

Discussion in 'Cirrus' started by Mark S, Sep 11, 2003.

  1. Mark S

    Mark S Guest

    Just had a used starter installed into the above car.
    Alas, it don't work all the time. You can always
    hear the solenoid kicking in but not the starter.
    When it doesn't work, i can crawl under the front end
    and wiggle the wire between the solenoid and the starter
    and then it starts.

    the starter is from Greenleaf and under warrenty.
    It is almost impossible to get at it to remove it myself
    because of a bar that runs under it. Any suggestions
    on how i can replace it myself. I am under a tight budget
    and don't really want to pay a garage 80-100 to replace
    it for me.

    On a side note, the thing is sucking up gas badly an
    you can really smell the gas when starting it up

    Mark S
     
    Mark S, Sep 11, 2003
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.