94 intrepid

Discussion in 'General Motoring' started by mbaker94, Feb 24, 2006.

  1. mbaker94

    mbaker94 Guest

    same old same old.tranny stuck in 2nd gear.replaced both input and out
    put sensors changed tranny fluid and filter,same problem.was told it
    could be the tran control module .i believe it is located on the
    drivers side fender wall,under the hood and next to the battery.it is
    about 4in by 2-3in plug.that plugs into another silver box that is
    about 6-8in sq.it is held in to this box by a 5/16 bolt.am i in the
    right place?.do i have the right part(tran control module)?.is it the
    plug or the box that the plug plugs into?if it is the plug(complete
    with a gang of about 10 wires),where do all the wires go ?thanks in
    advance for any
     
    mbaker94, Feb 24, 2006
    #1
  2. mbaker94

    Joe Guest

    Have you considered diagnosis? The reason that it's in 2nd gear is that the
    computer has made a decision. Wouldn't you like to know what the decision
    was?
     
    Joe, Feb 25, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 1997 Intrepid cooling problem with 3.5 l V6

  2. A/C Question - 94 Intrepid 3.5

  3. replacing 2000 intrepid battery cables

  4. 94 Intrepid - replacing just 2 tires?

  5. Bad output speed sensor on '93 Intrepid

  6. '96 Intrepid Tie Rod Bushings

  7. Intrepid imstrument cluster randomly works and doesn't

  8. Dodge Intrepid 2.7 liter

Loading...