93' Sundance 2.2 front main seal (???)

Discussion in 'General Motoring' started by D. Reid, Oct 31, 2005.

  1. D. Reid

    D. Reid Guest

    I have a 93'Ply Sundance 2.2 that keeps blowing the front main seal out. I
    mean LITERALLY! It blows the seal clean out of its seat!
    There is just a little blow by out the oil filler hole but isnt the PCV
    (good) and the CCV return line suppose to vent this sufficiently?

    It has twice blown the seal and twice I have reinstalled it. Cyl comp checks
    are normal and fairly even. It's a pretty snug fit on the seal as well.

    Something is pressurizing the crankcase evidently.

    Any ideas?

    Thanks
    Dave
     
    D. Reid, Oct 31, 2005
    #1
  2. D. Reid

    Daniel J. Stern Guest

    Only if it's in proper condition, which on these cars it usually is not.
    See my earlier post at http://tinyurl.com/yr2pg for details on how to
    service the *complete* PCV system.

    DS
     
    Daniel J. Stern, Oct 31, 2005
    #2
  3. D. Reid

    D.Reid Guest

    Thanks for the reply Dan. I'll investigate the PCV system a little further.

    Dave
     
    D.Reid, Nov 2, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 90 Dodge Spirit; Crankshaft front sprocket/oil seal - HELP!

  2. Caravan sliding door seal

  3. Neon CAM seal leak.

  4. 2003 Grand Caravan 41000 Km - Upper body seam seal crack

  5. Left Transaxle Shaft Seal

  6. replacing oil pan gasket and front crank seal

  7. Need '95 Neon SOHC Main Seal Instructions

  8. Holley carburetor main jet sizing question

Loading...