93 lebaron high beams & signals work Intermittently

Discussion in 'LeBaron' started by Quartus, Jul 14, 2005.

  1. Quartus

    Quartus Guest

    Anyone have problem with high beams not working all the time. I have
    the multipurpose turnsignal/highbeam switch. Sometime the high beams
    come on and sometimes they don't (low beams go off when high beams are
    on, is this normal?) Turn signals work sometimes, sometimes they don't.
    I just got the car (less than month) and looks like it was wrecked on
    driver's side front end so I'm not sure if there might be a short near
    the headligh assembly (it looks new) Any help would be great!
     
    Quartus, Jul 14, 2005
    #1
  2. Quartus

    Daniel J. Stern Guest

    Your multifunction switch sounds in need of replacement. The "low beams
    off when highs come on" deal is as they come from the factory.
     
    Daniel J. Stern, Jul 14, 2005
    #2
  3. Quartus

    Quartus Guest

    Thanks for the advice, I found I could get the high beams & blickers to
    work if I "move" around the console housing near the switch. It looks
    like the connector between the console & the dash is sloppy or has a
    broken solder connection.
     
    Quartus, Jul 15, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 99 Cirrus LXI High? Beams

  2. 2001 Twn&Cntry Windows (Both) Work Intermittently!!

  3. 1987 Chrysler Lebaron A/c / Heaterfan will not work on high

  4. 88 New Yorker- SLOW turn signals????!!

  5. '02 Caravan gauges and turn signals out

  6. touch halogen, lose low beams if installing

  7. 1990 LeBaron Conv - Left turn signals don't flash. I need help. Any guidance?

  8. Hi/lo beams

Loading...